Effective Date: December 18, 2025
Welcome, Artificer, to PlamoForge 3D! This resource is a community hub built on the highest standards of fabrication and modeling integrity. Before proceeding to the workshops, please review the following Operational Protocols. These Terms of Use ensure that all data access, content sharing, and transactions adhere to the established security and operational framework. Proceeding confirms your full compliance.
1. Acceptance of Protocols
By accessing or using the PlamoForge 3D website (the “Site”), you, the user, agree to be bound by these Terms of Use and all terms incorporated by reference. If you do not agree to all of these Terms, cease your operation and do not use the Site.
2. Intellectual Property and Limited License
2.1 Ownership: All content, design, data, code, and technical guides on the Site are the property of PlamoForge 3D or its licensors and are protected by U.S. and international copyright laws.
2.2 IP Disclaimer (Critical): PlamoForge 3D is an unauthorized technical guide and fan community. This Site is not affiliated with, endorsed by, or sponsored by Bandai Namco, Games Workshop, or any associated intellectual property owners. All third-party IP remains the property of its respective owner.
2.3 License: We grant you a limited, non-transferable, non-exclusive license to access and use the Site content solely for your personal, non-commercial, hobby-related purposes.
3. User Generated Content (UGC)
3.1 User Responsibility: You are solely responsible for any content (comments, images, forum posts) you submit to the Site (“UGC”).
3.2 Content License Grant: By submitting UGC, you grant PlamoForge 3D a perpetual, royalty-free, worldwide, transferable, and sublicensable license to use, reproduce, modify, and distribute your content in connection with the operation of the Site.
4. DMCA Compliance and Notice
PlamoForge 3D respects the intellectual property rights of others. In accordance with the Digital Millennium Copyright Act of 1998 (DMCA), we maintain a Notice and Takedown procedure.
4.1 Notice of Infringement: If you believe any content on the Site infringes upon a copyright you own, you must send a written notification of such infringement to our Designated Copyright Agent.
4.2 Designated Copyright Agent Contact: Pursuant to Title 17, United States Code, Section 512(c)(2), all notifications should be sent to the Site’s Designated Agent.
> Designated DMCA Agent: MingYi Ding (Primary Infringement Protocol Officer)
> Address: Designated Fabrication Command HQ Coordinates (DMCA Address): Room 201, Building B, No. 66 Shahe Road, Jiading District, Shanghai, People’s Republic of China,201803
> Encrypted Communication Protocol (Email): dmca@plamoforge3d.com
5. Affiliate Disclosure and Third-Party Links
5.1 Affiliate Transparency (FTC Compliance): The Site contains affiliate links, primarily to Amazon and other hardware or tool vendors such as Amazon Associates ,ShareASale, eBay Partner Network (EPN), CJ Affiliate (Commission Junction), AliExpress Affiliate Program, e.g., This means we may earn a commission if you click on the link and purchase an item, at no additional cost to you.
5.2 Third-Party Products: We do not warrant the quality or safety of any third-party products. Your use of such products is governed by the third party’s terms and conditions.
6. Disclaimer of Warranties and Limitation of Liability
6.1 “AS IS”: The Site and all content, guides, and services are provided on an “AS IS” and “AS AVAILABLE” basis. We expressly disclaim all warranties of any kind.
6.2 Limitation of Liability: In no event shall PlamoForge 3D be liable for any indirect, incidental, or consequential damages arising out of your use of the Site, including damages resulting from reliance on any technical guide or injuries sustained while handling tools.
7. Governing Law and Arbitration (US Standard Clause)
7.1 Governing Law: These Terms shall be governed by and construed in accordance with the laws of the State of California, U.S.A., without regard to its conflict of law principles.
7.2 Binding Arbitration: For any dispute, you agree to submit the dispute to binding arbitration in San Francisco, California or New York City, instead of seeking a resolution in court. You agree that any arbitration shall be conducted on an individual basis.
8. Amendments and Termination
We reserve the right to amend these Terms at any time. We also reserve the right to terminate your license to use the Site and block your access at our sole discretion, without notice, for any violation of these Terms.
9. Contact Information
For general inquiries regarding these Operational Protocols, please contact us at: contact@plamoforge3d.com